MagnetGuard Wireless PRO

Professional magnetic detacher detection system MagnetGuard ® Wireless PRO with advanced features. Compatible with MagnetGuard ® Wireless sensors.

Can detect the presence of powerful magnets used by criminals to remove the anti theft sensors. Allows installation in shop entrances, passages and in fitting rooms. Suitable for operation in hard electromagnetic conditions - close to railway and subway lines, driveways, moving staircases. The software allows you to fine tune, maintain and analyze event log. System consists of sensors (detectors) and alarming devices. For ease of equipment installation and quick configuration system uses the "one-touch" principle.


MagnetGuard® Wireless PRO Sensor
Power supply Lithium cell AA ER14505 (3.6V 2.4Ah)
Dimensions Sensor 80mm x 40mm x 20mm; satellite 25mm x 16mm x 10mm
Color Gray
Mounting Using double-sided adhesive tape
Detacher detection distance* Up to 1.2m in all directions
Controls 1 button inside («Connect/Reset») 1 button on front panel («Alarm/Setup»)
RF band 2.4GHz
Radio transmission distance** Up to 50m (in open field)
Communication protocol IEEE 802.15.4 compatible
Number of supported alarming devices Up to 10 alarming devices
* The detection distance depends on the magnetic properties and construction of magnetic detacher and sensitivity settings.
** The transmission distance depends on many factors ( the presence of the shielding structures, the mutual orientation of the devices, etc. ).

MagnetGuard® Wireless PRO Alarming Device
Power supply 5V, 0.5A (from external power adapter / USB plug)
Dimensions 80mm x 40mm x 20mm ( L x W x H )
Color Gray
Mounting Using double-sided adhesive tape
Indication Audible (alarm), LED (alarm zone number)
Controls 2 buttons on front panel(«Connect/Reset» and «Mode»). USB interface. Software for setup and tuning.
Additional features Real-time clock, event logger
RF band 2.4GHz
Communication protocol IEEE 802.15.4 compatible
Number of supported sensors Up to 8 sensors (also compatible with MagnetGuard® WIRELESS sensors)

Limitations on usage:
- Installation of the sensors is not closer than 1m from moving metal objects;
- Installation of the sensors is not closer 0.5m from the power wiring and acousto-magnetic anti theft systems;
- Installation of the system is not 20m from the closest subway lines and trains , transformer substations and high tension power distribution lines.

MAGNETGUARD 

#fc3424 #5835a1 #1975f2 #2fc86b #fbodc9 #eef10570 #230813202604